PRODUCTS
CamerasLights
Cables
Cable Measure
Connectors
Lasers
Rotators
Winches
Controllers

Video Samples

ABOUT US
Support
Quality

Contact us

UNDERWATER CONNECTORS

We offer wet mateable connectors in a wide variation of types. They are simple, rugged, reliable, cost effective and manufactured in different types and shapes. These connectors has been chosen by professional users from the underwater industry throughout the world for the last 30 years. 

CIRCULAR

From 2 to 16 contacts


Datasheet

LOW PROFILE

From 2 to 9 contacts

Datasheet

METAL SHELL


From 2 - 10 contacts

MICRO

From 2 - 8 contacts

Datasheet

PENETRATORS

Handling Procedure
The connector should not be exposed to long term heat or sunshine. If this occurs,  soak it on fresh water before use.
Ensure the connector is lubricated. We recommend Loctite 8021 spray or Molykote 44 medium.
Remove any accumulation of sand or mud in the female contact with fresh water. 
Do not disconnect by pulling on the cable. Pull straight, not at an angle. Avoid sharp bends at cable entry.
Ensure that there are no angular loads, as this destroy the connector.
Do not overtighten the connectors. Recommended torque: 7/16" thread: 4.2 Nm        1/2" thread: 7 Nm       5/8" thread: 10 Nm